PRONAR T669XL Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 135

PRONAR T669XL Скачать руководство пользователя страница 67

SECTION 4

Pronar T669XL, Pronar T700XL

4.5

4.1.4 PREPARING THE TRAILER FOR NORMAL USE

DANGER

Careless and improper use and operation of the trailer, and non-compliance
with the recommendations given in this operator's manual is dangerous to your
health.

The trailer must never be used by persons, who are not authorised to drive
agricultural tractors, including children and people under the influence of
alcohol or other drugs.

Non-compliance with the safety rules of this Operator’s Manual can be
dangerous to the health and life of the operator and others.

Scope of inspection activities

•

Visually inspect if the tyres are properly inflated. In case of doubt, carefully check

tyre pressure.

•

Check technical condition of drawbar eye.

•

Check correctness of electrical system operation.

•

Check technical condition and completeness of shields and protection devices.

•

Install the slow-moving vehicle warning sign - if the trailer is used on public roads.

4.2

HITCHING THE TRAILER TO TRACTOR AND UNHITCHING

THE TRAILER FROM TRACTOR

The trailer may be hitched only to a technically sound agricultural tractor with the electric,

pneumatic and hydraulic connections and the tractor's hitch conforming to the trailer

Manufacturer's requirements.

In order to hitch the trailer to the tractor perform the actions below in the sequence

presented.

Hitching to tractor

Visually inspect the technical condition of the trailer.

Immobilise trailer with parking brake.

«
...
65
66
67
68
69
...
»

Содержание T669XL








































































































































Отзывы:

Нет отзывов