PRONAR T669XL Скачать руководство пользователя страница 72

Страница: 72 / 135

Pronar T669XL, Pronar T700XL

SECTION 4

4.10

Unlock tractor hitch and disconnect trailer drawbar from tractor hitch and drive

tractor away.

ATTENTION

If the ball hitch is used, first unlock the tractor hitch and then raise the drawbar
by means of the support and drive the tractor away from the machine.

4.2.1 TELESCOPIC SUPPORT OPERATION

Proper height of drawbar eye in relation to tractor hitch can be set using the telescopic

support with mechanical gear - figure (4.1).

Position (C) is used for fast rising and lowering the support foot in order to reduce the

distance between the support foot and the ground. Position (B) is used for lowering and rising

the drawbar of unloaded trailer. In position (B), the support foot (2) moves slowly and a large

force is not required to raise the machine drawbar.

FIGURE 4.1

Adjusting the drawbar height

(1) telescopic support, (2) support foot, (3) crank, (4) gear, (5) securing pin, (A) neutral

position, (B) position – I gear (speed under load), (C) position – II gear (high speed)

Содержание T669XL








































































































































Результаты поиска

Содержание T669XL

Отзывы:

PRONAR T669XL, Руководство оператора, Страница: 72 / 135

Результаты поиска

Содержание T669XL

Отзывы: