PRONAR T669XL Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 135

PRONAR T669XL Скачать руководство пользователя страница 73

SECTION 4

Pronar T669XL, Pronar T700XL

4.11

Raising the support

Remove safety pin (5).

Move support crank (3) from neutral position (A) to position (B).

Turn the crank in proper direction in order to raise the support foot (2)

maximally upwards.

Install securing pin.

Place crank in neutral position (A).

Lowering the support

Remove safety pin.

Move crank (3) to position (B) or (C).

Turn the crank in proper direction in order to lower the support to the ground

or adjust the drawbar eye height in relation to the hitch (if the trailer is to be

hitched to tractor)

4.3

LOADING AND SECURING LOAD

4.3.1 GENERAL INFORMATION ABOUT LOADING

ATTENTION

The trailer is also designed for transport of harvested crops and agricultural
products (volumetric or poured). It is permissible to transport other loads
(timber, building materials packed loads), on the condition of securing the load
box against damage (abrasion of paint covering, corrosion etc.).

DANGER

People or animals must not be carried on the trailer.

During work, keep a safe distance from overhead electric power lines.

Ensure that during unloading / loading or raising the load box nobody is near
the trailer. Before tipping load box ensure that there is visibility and make
certain that there are no bystanders.

The load on the trailer must be secured against slipping and contaminating the
road during travel. If it is not possible to properly secure the load, do not
transport it.

«
...
71
72
73
74
75
...
»

Содержание T669XL








































































































































Отзывы:

Нет отзывов