PRONAR T669XL, Руководство оператора, Страница: 28 / 135

Pronar T669XL, Pronar T700XL SECTION 2
2.4
is factory adjusted by the Manufacturer and must not be changed when the trailer
is used.
•
In the event of malfunction of the hydraulic or pneumatic system, do not use the
trailer until the malfunction is corrected.
•
When connecting the hydraulic conduits to the tractor, make sure that the
hydraulic system of the tractor and the hydraulic system of the trailer are not
under pressure. If necessary reduce residual pressure in the system.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may penetrate the skin and cause infections. In the
event of contact of oil with eye, rinse with large quantity of water and in the event
of the occurrence of irritation consult a doctor. In the event of contact of oil with
skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the Manufacturer.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil which has lost its properties should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
•
Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.
2.1.4 LOADING AND UNLOADING
•
Unloading the trailer is done only by tipping the load box to the rear.
•
Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
•
Loading and unloading work should be carried out by persons experienced in this
type of work.