Promise Technology Vess A Series Скачать руководство пользователя страница 79

Страница: 79 / 259

Managing with WebPAM PROe

Vess A6120 Product Manual

dMInIStratIVe

oolS

Click the

symbol of the Administrative Tools icon reveal subsystem administrative tools menu links

for User

Management, View Network Settings, Performance Monitoring and Software Management.

The Administrative

Tools menu lists text hyperlinks to these same menus, plus links to menus to Restore Factory Default settings,

Clear Statistics and Save System Service Report.

eStOre

FaCtOry

deFault

SettingS

To restore any firmware or software settings to the default values:

Click on the Administrative Tools icon.

2. Click on the

Restore Factory Defaults

link to reveal a new menu.

Check mark the option boxes for the settings you want to return to the factory default values.

Default

Settings options include:

4. Click the

Submit

button to return the selected settings to default values. To deselect all options and start

over, click the

Reset

button.

LeAr

tAtistiCs

To clear all subsystem statistics for controllers, ports physical drives and logical drives:

Click on the Administrative Tools icon.

2. Click on the

Clear Statistics

link to reveal a new menu.

3. Click on the

Submit

button to clear all device statistics.

Firmware Default Settings

• Background Activities

• Controller Settings

• Enclosure Settings

• Physical Drive Settings

• Subsystem Settings

Software Default Settings

• Service Settings

• Web Server Settings

• Email Settings

Содержание Vess A Series



































































































































































































































































Результаты поиска

Содержание Vess A Series

Отзывы:

Promise Technology Vess A Series, Руководство по эксплуатации продукта, Страница: 79 / 259

Результаты поиска

Содержание Vess A Series

Отзывы: