6.3 Access code
The access code cannot be changed.
You can activate the access code for the DULCO
®
turb C in the configuration menu. If
the access code has been activated, a
‘Key’
symbol (1) is shown in the lower right-hand
section of the LCD display, when the
[MODE/EXIT]
button is operated.
A0519
Fig. 11: Access code
When one of the access code numbers if flashing, you can change the number with the
UP or DOWN button and confirm with the ENTER button.
Entering the access code
The access code (333) must be entered in order to access the
‘CAL’
or
‘CONFIG’
menus.
1.
The first number of the access code flashes. Select the correct number with the
UP or DOWN button and then press ENTER
ð
The second number of the access code flashes.
2.
Select the correct number with the UP or DOWN button and then press ENTER
ð
The third number of the access code flashes.
3.
Select the correct number with the UP or DOWN button and then press ENTER
Commissioning
36
