10
–
(values by default).
(do not use the number of the serial port physically present on the PC, «in
use »). Please note the number of the port COM, you will need it to configurate Flexi Starter.
Fill the following window as follows
CAUTION : if the actual number of port is superior to COM10, you should change it and attribute it
the number from 1 to 10
11
12
– Click on "OK" to close the window
"Advanced" and fill the parameters of the port as
below :
Click on OK to validate, close the windows
and
again the PC to take into account the
modifications.
–
restart
17
PROMACUT PC-730E
[email protected] - www.promattex-international.com
Address: 7 bis impasse Denis Dulac, 94700 MAISONS-ALFORT, FRANCE
Phone: 00 33 141 79 00 45 - Fax : 00 33 143 53 93 57
