10
– “Production Manager” opens, it is an
equivalent of printing queue which makes
the interface between the PC and the
Plotter
It is possible to access to advanced
setting by double clicking on the plotter
model.
11
– Once double clicked on the plotter
model, new window opens
Go to the third tab
12
– In order to get high quality cutting it is
vital to indicate the Offset of the used
blade
Tick the case”offset of the knife” then
enter the adapted value for the used blade
Generally, the Offset of the blade will be
0.025cm or 0.035 cm.
Hit “apply” then “ok” on the bottom right
24
PROMACUT PC-730E
[email protected] - www.promattex-international.com
Address: 7 bis impasse Denis Dulac, 94700 MAISONS-ALFORT, FRANCE
Phone: 00 33 141 79 00 45 - Fax : 00 33 143 53 93 57
