20
– After you're finished with the 4th repair point, the following window appears:
21
– On the plotter, click on the
button,
here is the screen:
±
22
– On the plotter, click on the “enter” button
The lame moves, it must be exactly above the middle repair point (number 4)
In the following window, click on “ok” to start the cutting
41
PROMACUT PC-730E
[email protected] - www.promattex-international.com
Address: 7 bis impasse Denis Dulac, 94700 MAISONS-ALFORT, FRANCE
Phone: 00 33 141 79 00 45 - Fax : 00 33 143 53 93 57
