3/ DEFINITION OF PRINCIPAL COMPONENTS
3
4
5
6
7
2
1
8
11
1
2
3
4
5
6
– Reset button
– Transmission belt
*
– Paperweight wheel
– Runner
– blade / tools holder
– Display
10
7
8
9
10
11
– Control panel
– RS232C port (serial) / USB port
– Stand
– SD card reader
– Teflon stripe
*
: Reset buttons on the left and right side of the plotter allow resetting the plotter
when the slider touches one of the buttons. In this case you shall adjust the cutting
dimensions so that
the slider remains in the cutting area without touching the extremities
of the plotter. As well, the point of origin of cutting cannot be set at the extremity of the
right side of the plotter. It must be set before the slider touches the reset button (see page 10).
ATTENTION
9
05
PROMACUT PC-730E
[email protected] - www.promattex-international.com
Address: 7 bis impasse Denis Dulac, 94700 MAISONS-ALFORT, FRANCE
Phone: 00 33 141 79 00 45 - Fax : 00 33 143 53 93 57
