4
– Production manager opens
5
– Opens again the window “to cut/to
draw”
In “material” select “defined by the user”
then enter the dimension of the cutting
surface of the used vinyl
Pay attention to the width, this should
correspond to the real width useful of the
vinyl, it can not be superior
6
– Select “send now” :
7
–Select the number of copies and the
spacing between them
8
– Choose the orientation of the
pattern to cut and if needed the
Mirror effect
9
– Check the plotter is online;
origin point defined and USB
cables correctly plugged in then
click on “send”
26
PROMACUT PC-730E
[email protected] - www.promattex-international.com
Address: 7 bis impasse Denis Dulac, 94700 MAISONS-ALFORT, FRANCE
Phone: 00 33 141 79 00 45 - Fax : 00 33 143 53 93 57
