8
Also, do not use the wheel clamps in the event of:
- fracture, deformation, sharp notches or cracks of any kind
- signs of high heat exposure (e.g. black colouring)
- wear and excessive corrosion
- unrecognisable marking
Regular inspections
Perform a visual inspection before each use to detect any damage.
Damaged wheel clamps must not be used and must be removed from service for inspection by an expert.
In addition, the load-bearing equipment must be inspected by an expert at least once a year. In the event of frequent use,
severe wear or poor condition, inspections should be even more frequent (according to BGR 500).
Warranty
The warranty expires if the product is used improperly and if the information in these operating instructions is not
observed.Further warranty provisions can be found in the General Terms and Conditions of ProLux Systemtechnik
GmbH & Co KG.
EC declaration of conformity
according to the EC Machinery Directive 2006/42/EC
Annex II A
We hereby declare that the machine/equipment described below complies with the relevant essential
safety and health requirements of the relevant EC directive(s) due to its design and construction and in
the version marketed by us. This declaration ceases to apply in the event of a change to the machine/
equipment not agreed with us.
Item
number 600255
Item
name
Wheel
clamp
Relevant EC Directives:
EC Machinery Directive 2006/42/EC
Harmonised standard:
DIN EN 1492-1
Applied national standards
and other specifications:
ISO 12100-1/2 "Safety of machinery - General principles of design".
BGR
500
(Section
2.8)
ProLux-Systemtechnik GmbH & Co. KG
Am Schinderwasen 7
D – 89134 Blaustein
Blaustein, 31.03.2016
________________________________________
Manuel Jungbauer, Quality Assurance
Original operating instruction - Wheel clamp
English
