P a g e | 8
Progressive Automations – Position Control Communication Protocol
2. Basic Information
2.1 Components
2.2 Dimensions
#3 M3 nut can be used to fix the hinge and hinge base. Also, the M3 nut can be used
between the rod-end nut and the rod-end tip as a stopper.
Please refer to the detailed dimensions under the 3D drawing on our website. (progressiveautomations.com → Resources
→ 3D Models)
** For 1.18” stroke actuator, the factory default stroke
range is set at 1.06”. Users may extend it to 1.18” using
our Actuator manager software if necessary. (For better
mechanical stability, 1.06” is recommended.)
[1.06" Model]
[2.20 " Model]
