progeo TEKNA TILT adult, Руководство пользователя

Страница: 18 / 36

Tekna Tilt 18
3.3 Tilt in space
When tilting the seat backward, the point of balance of the
wheelchair moves backward, too.
For such reason, it is vital that the two anti-tip wheels are
always positioned facing backward in order to work as
safety device preventing the wheelchair from tipping back.
The wheelchair can overbalance in function of different
factors such as the type and position of the backrest, the
patient’s anatomy and pathology, the surface the
wheelchair is used on.
Never use the wheelchair if the anti-tip wheels are not positioned to prevent the
wheelchair from tipping back.
3.4 Driving the wheelchair
The attendant plays an important role since he/she drives the wheelchair and carries out the tilt in
space operation.
Driving the wheelchair does not arise particular difficulties thanks to its fluency characteristics and
the push handle position. However, more attention should be taken when driving the wheelchair
outdoor.
The patient, by means of the hand rims, can also propel the wheelchair on the rear wheels (22” or
24” rear wheels). However, due to the rearward position of the rear wheels, this model is not
suitable for long distance when propelled by the user.
Avoid those holes on the ground that may lead the wheelchair to overbalance
and consequently cause harm to the user and to the wheelchair.
Driving the wheelchair along slopes may involve potential risks and it should be
done with extreme care.
The attendant must always keep control over the wheelchair.
The maximum gradient that can be attempted in complete safety is 6% (3°).
While driving along slopes it is highly suggested equipping the wheelchair with drum
brakes that assure an optimum parking stability in case of a stop (even when driving
uphill), but also to better control the speed.
While driving downhill, tilt the seat as much as necessary to prevent the user from
slipping out of the wheelchair.
While driving uphill, always turn the ant-tip wheels to let them work as safety device.
Never leave the wheelchair on a slope without engaging the brakes.
3.5 Dealing with obstacles: stairs and steps
While getting over obstacles such as stairs and steps, approach the obstacle at a
moderate speed
Never attempt to go over steps or other obstacles that are over 20cm (6
inches) height
If particularly difficult obstacles are encountered a second attendant who
should take hold and control the front of the wheelchair in order to ensure
complete safety.
When going up or down a step, it is
necessary to raise the front wheels first;
before doing that, you have to turn the two
anti-tip wheels in
GOING DOWN STAIRS WITH AN ATTENDANT
Take the wheelchair right up to the obstacle so that the
front wheels are as close as possible to it.
Grip the rear handles tightly and push down in order to
raise the front of the wheelchair.
Keep the wheelchair in this position and accompany it
down the stairs one-step at a time. At the end of the
descent, tip the chair forward so that the front wheels are
once again touching the ground.
To make raising the front of wheelchair easier for the attendant, it is advisable to equip
the wheelchair with the accessory “tipping aid”.