progeo TEKNA TILT adult, Руководство пользователя

Страница: 31 / 36

Tekna Tilt 31
8.2 Inspection of components
As a daily check, we recommend the following operations:

Check the tyre pressure

Check the quick release axles

Check the folding system
 Check the footplate

Check the parking brakes

General check of all screws
8.3 Trouble shooting guide
With constant and prolonged use of the wheelchair, or after the adjustment of any part, you may
encounter a number of “defects” which can easily be eliminated by qualified personnel, or, in some
case, indicated with the symbol ◙, even by the user or by his/her attendant.
We recommend that you always have your wheelchair adjusted by qualified personnel.
Problem Cause of the problem Solution
The wheelchair does no go
straight.
The front wheels have not
the same height.
Check front wheels height
The tyres pressure is not
correct Inflate the tyres at the same
pressure ◙
The spokes are broken or
loosen. Change the damaged spokes or
tighten the loosened one.
The front wheels bearings
are dirty or damaged. Clean the bearings ◙
Change the bearings
The wheelchair tips up
easily.
The rear wheels are
adjusted in a very forward
position.
Adjust the rear wheels in a more
backward position
The brakes do not work
properly.
The tyre pressure is not
correct
Check the pressure of tyres. ◙
Bad adjustment of brake
position
Check brake adjustment
The wheelchair results
difficult to propel. The tyre pressure is not
correct
Check the pressure of tyres. ◙
Tyres are worn out Change tyres. ◙
The wheelchair is hard to
open. The backrest bands are too
tighten.
Slacken the backrest bands. ◙
The tilt-in-space does not
work or work in an
anomalous way.
One or both gas springs
extends even when you
release the lever.
Check the adjustment of the gas
spring and of the cables.
One or both gas springs
does not extend or
compress.
Check the adjustment of the gas
spring and of the cables or change
the gas springs.