In setup state, input [57] ~ [59], then input the SMS receiving number,
and then press [#] button to confirm. The main unit will make a beep,
the [Signal] indicator will flicker once and you will hear “setting
completed”, which indicate setup successfully.
Operating method: [XX] [YY…YY] [#]
XX indicates: address codes of message-receiving numbers from the
first group to the third group [57] ~ [59]
YY…YY indicates: the SMS receiving number
For example: setup 13822222222 as the first SMS receiving number
Operating method: [57] [138222222] [#]
Note:
the sms-receiving number can be maximum 15 digits.
19.Delete SMS Receiving Number
In setup state, use keypad to input [57] ~ [59], and then press [#]
button to confirm. The main unit will make a beep, the [Signal] indicator
will flicker once and you will hear “delete completed”, which indicate
SMS number is deleted successfully.
Operating method: [XX] [#]
XX indicates: address codes of SMS receiving numbers from the first
group to the third group [57] ~ [59]
For example: delete the first SMS user number from the system
Operating method: [57] [#]
20.Defense Zone Programming
If you want to change the alarm attribute of defense zone, such as turn
off the siren when system alarms, you can do it by defense zone
programming. In setup state, first input [60], then the defense zone
number [01~99], then input defense zone type [1~4], then input alarm
type [1~8], and then select siren on/off [0/1], at last press [#] to
confirm. You will hear the main unit emit a long beep and a voice
prompt “setting completed”.
Operating method: [60] [AA] [B] [C] [D] [#]
AA: defense zone number [01~99] means zone 1 to zone 99;
B: defense zone type
[1]: real-time defense zone [2]: 40 seconds delay defense zone
[3]: 24 hours defense zone [4]: bypass defense zone
C: alarm type
[1] SOS Alarm [2] Fire Alarm [3] Gas Leak Alarm
[4] Door Alarm [5] Hall Alarm [6] Window Alarm
[7] Balcony Alarm [8] Boundary Alarm
D: siren ON/OFF: [0] OFF, [1] ON
For example: set defense zone 12 to be 24-hour, fire alarm and siren
on
Operating method: [60] [12] [3] [2] [1] [#]
Note: The programming is suitable for all defense zones including
wired defense zones
21.Home Arm Defense Zone Setting
Home arm defense: sometimes (for example, when you are at home),
you want some of the sensors work while some do not, you can do this
setting.
In setup state, use keypad to input [61], then choose the
corresponding defense zone number [01~99], then choose [Home
Arm], and then choose whether alarm [0/1] button, and finally press [#]
to confirm. The main unit will make a long beep and a voice prompt
“setting completed”.
Operating method: [61] [XX] [A] [#]
XX indicates: [01~99] is defense zone 1 to defense zone 99
A indicates:
[0]: no alarm under home arm status even the sensor is triggered
[1]: alarm under home arm status
Example: set sensor in defense zone 11 make alarm under home arm status
Operation:
[
61
] [
11
] [
1
]
[
#
]
Example: set sensor in defense zone 12 not make alarm even when
it’s triggered under home arm status
13
14
Functions Settings
Functions Settings
