Operation:[61]
[12] [0] [
#
]
After this setting, when you “home arm” the system, sensor in defense
zone 55 will not work.
Note:
Home arm status is suitable for all defense zones including
wired defense zones
22.Voice Recording
In setup state, use keypad to input [701], and then press [#] to confirm. The
main unit will emit a beep and the [ ] indicator is on, and after 10 seconds
countdown, recording starts: record at 30cm away from the main unit with
moderate tone; 10 seconds later, the main unit will make a beep indicating
the recording stops and the recorded voice will replay.
Operating method: [701] [#]
LCD display:
23.Arm/ Disarm Siren Sound Setting
After you activate this function, when you arm the system, the external
siren will sound one short beep; and when you disarm it, there will be
two short beeps.
In setting status, use keypad to input [75], then set siren sound
OFF/ON by [0/1] button and finally press [#] to confirm; voice prompts:
setting completed, please enter instruction”.
Operating method: [750] [#] or [751] [#]
[0]: sound OFF, (system default: 0)
[1]: sound ON
Example: set arm/disarm siren alarm sound ON
LCD display:
24.Siren Setting in “Emergency Help” Mode
Press “Emergency/SOS” button on the remote controller or the keypad,
the system will make alarm immediately. You can choose to activate
the siren sound or not.
In setup state, use keypad to input [76], and then [1/0], finally press [#]
to confirm. The main unit will make a long beep and a voice prompt
“setting completed”.
Operating method: [76] [A] [#]
A indicates: [0]: siren off in “Emergency Help” mode
[1]: siren on in “Emergency Help” mode
System default: [0] siren off
For example: Set Emergency siren ON
Operating method: [76] [1] [#]
LCD display:
25.SMS Notification for Arm/Disarm (Default: OFF)
In setup state, input use keypad to input [77], and then [1/0], finally
press [#] to confirm. The main unit will make a long beep and a voice
prompt “setting completed”.
Operating method: [77] [0] [#] or [77] [1] [#]
[0]: no SMS for arm/disarm to the 3 alarm-receiving numbers (default)
[1]: SMS for arm/disarm to the 3 alarm-receiving numbers
For example: send SMS when arm/disarm
Operating method: [77] [1] [#]
LCD display:
15
16
Functions Settings
Functions Settings
