8
PL-5700 Series User’s Manual
Before Using the PL
Prior to use, be sure your PL is set up as follows.
Install PL memory
Refer to
1-2 Options
and the instruction manual that came
with the memory;
3-2 1. Installing the DIM Module
(PL-
EM000/EM001/EM002);
3-2 2. Installing the External
Cache Memory Board
(PL-EC000)
Install HDD unit
Refer to
1-2 Options
and the instruction manual that came
with either the HDD unit;
3-2 3. Installing the HDD Unit
(PL-HD000), or the Flash File Disk Unit (PL-FF000/FF001);
3-2 4. Installing the FDD Unit
(PL-FD000/FD001);
3-2 5.
Installing the Memory Card Interface Unit
(PL-MC000)”;
3-2 6. Installing the IDE Slave Adapter
(PL-SA000);
3-2
7. Installing the Flash ROM Board
(PL-FR000)
Turn the PL ON
Refer to
4-2 Wiring the PL
System Setup
Refer to
Chapter 5 System Set-up
OS Installation
Refer to the OS’s installation manual (e.g. Windows
®
95
package’s manual)
• For system setup and OS installation, a PS/2 type keyboard is necessary.
• To use Windows
®
3.1 or Windows
®
95, install the PL-5700 Driver & Utility
Disk’s Display Driver. (For installation information, see the disk’s
README.TXT file)
• For information on the PL-5700’s bundled utility software, see the
README.TXT file on the Driver & Utility Disk.
Caution
• Before turning the PL ON, be sure to install its memory
(DIM module). If this module is not installed, the PL can be
turned on, but will not operate.
