System Set-up
5-4
PL-5700 Series User’s Manual
IDE Adapter 0 Master
IDE Adapter 0 Slave
These parameters are required only when the optional HDD unit is installed on
the PL. Set the type of hard disk for each master and slave unit connected to the
IDE connector.
Place the cursor on the “IDE Adapter 0 Master” parameter, and press the [Enter]
key to display the following screen.
Autotype Fixed Disk
Press the [Enter] key to set the hard disk parameters automatically.
Type
Select a set of hard disk settings, from 1 to 39, which matches your hard disk
specifications. If a correct set is not found, select the “User” option and set val-
ues for the “Cylinders,” “Heads,” “Sectors/Track,” and “Write Precomp” param-
eters.
Set the “IDE Adapter 0 Slave” parameters in the same way.
Item Specific Help
Attempts to
automatically detect
the drive type for
drives that comply with
ANSI specifications.
F1 Help
↑↑↑↑↑
↓↓↓↓↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select Sub-Menu F10 Previous Values
← →
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main
Advanced Power Exit
IDE Adapter 0 Master (None)
Autotype Fixed Disk:
[Press Enter]
Type:
[None]
Cylinders:
Heads:
Sectors/Track:
Write Precomp:
