23
10.
Programming type 1905 ( A- )
This menu is known from KDC1905 systems, it enables basic editing of the residents list (programs
A-1 to A-4), advanced system configuration (all parameters are available), cleaning of settings and
data
backup.
This type of programming is available only in BM0900 modular base and control panel keyboards
(KDC3905), but can be edited using other keyboards (e.g. satellites, but also other KDC3905
keyboards).
Note! Parameters can be edited ONLY in BM0900 using an external keyboard (any type from the
KDC39xx series).
10.1.
Entering programming
In order to enter the programming of keyboard (3905) it is necessary to:
•
Press 0
•
Enter the standard code
“
240361
”
•
Enter the installer code (standard
“
0000
”
)
•
The keyboard will display
“
A-
”
•
Submenu selection is made using keys 0-9
It is possible to enter the programming of any keyboard (modular base) in the system (if they are
connected to the same CAN bus or connected via CAN bridges). It is possible from the satellite
level as well as from any keyboard with the control panel:
•
Press 0, enter the serial number of target device
•
Press the button
•
Enter the standard code
“
240361
”
•
Enter the installer code (standard
“
0000
”
)
•
The keyboard will display
“
A-
’’
From this moment on, the keyboard displays the programming menu of device, which serial
number was given in the procedure.
10.2.
Program A1
–
entering RFID tags
The A1 program is used to enter IDs, they are assigned to logical numbers.
When you enter the A1 program, the keyboard displays a message
–
it is necessary to apply
an ID.
•
If it has already been assigned, the keyboard will display the property number. You can
reassign to another premises by cleaning the number with button , then entering a new
number and accepting it with button
.
•
If a flashing number is displayed after ID has been applied, this means that ID has not yet
been assigned. In this case, the last number entered is displayed. You can assign an ID to
it by accepting the change with button
. This way you can quickly add several IDs to
one
number.
In order to enter the key to another premises, delete the proposed number with button
and then enter the new number and accept it with button
.
•
In order to delete an ID, place it on the keyboard and then delete the entered number
with button and accept it with button
.
