8
To adjust the balance, the volume of track must be increased steadily downwards and
upwards until induced. Then adjust the balance to dampen inducement. Repeat the procedure
until the track cannot be stabilized. The next step is to set the volume so that you can talk
comfortably. The adjustment is made in
“
manual
”
mode
–
letter
“
H
”
.
Settings are stored automatically, so after the call is finished; they will be entered in
parameters in program A-8. The adjustment applies to the keyboard from which the call was
made (they will be saved in the local parameter of keyboard in the given PBX).
It is recommended to perform the procedure for each keyboard in the system. Additionally,
in case of common satellites, the adjustment should be made by calling each PBX through
which calls can be made.
4.
In case of installation with an additional keyboard (satellite), enter its serial number into the
PBX. Before entering the serial number, the satellite keyboard will be inactive. The serial
number should be entered in parameter X001 (e.g. 2001) in program A-8. For each additional
keyboard, repeat the procedure of adjusting the audio channels and set the parameters of
locking.
5.
Table of codes
–
these are automatically generated lock codes. Codes are generated based on
the manufacture year and table number. You can independently enter code tables compatible
with previous systems, without service intervention. In this case, the parameters must be
changed in program A 8: 208
–
code table number and 209
–
year of code table.
It is also possible to copy the memory of old MCD1803 control panels
–
6.
Time server
–
in order to ensure time synchronization between keyboards (including
satellites), one KDC3905 (or BM0900 with RTCC module
–
only on request) should be
designated as a time server. In its program A-8, set the parameter 97 to 3.
7.
When you have finished entering residents
’
data and parameters, it is recommended that you
back up the cassette
’
s data. In order to do this, enter program A-6, select subprogram 2. After
displaying the message, enter the file name (only digits, without extension) and accept it with
button . The cassette will save data in XML file form on the memory card.
8.
Remove memory card from the device and save the saved data in case of keyboard failure.
