Procon V3D Series, Руководство программиста

Страница: 67 / 88

H - I - J
PROGRAMMER’S MANUAL
V8.94.11-
- 67 -
Submenu Explanation, further submenus Values Default setting Unit
11-1-2 save parameters
The actual parameter settings can be stored in memory or terminal. After the successful setting of
an application, it is worth saving the parameter set. In case of similar settings of more equipment,
after having saved in the programming terminal, the parameters can be uploaded in other
equipment, too.
11-1-2-1 memory
The actual parameter set can be saved in
any of the memories here.
If the name of the parameter set to be
saved (
11-1-4 name ) is the same as the
name of a parameter set saved in the
memory, then only that setting can be
overwritten. More than one parameter set
with the same name cannot be saved in
the memory at the same time.
memory 1
memory 2
memory 3 memory 1
11-1-2-2 terminal
The actual parameter set can be saved in
a memory of the terminal here.
If the name of the parameter set to be
saved (
11-1-4 name ) is the same as the
name of a parameter set saved in the
programming terminal, then only that
setting can be overwritten. More than one
parameter set with the same name cannot
be saved in the programmer terminal at
the same time.
terminal 1.
terminal 2.
terminal 3.
terminal 4. terminal 1.
11-1-3 enable parameter modification
Here can be set if the modification of the
parameters is allowed.
yes
no yes
11-1-4 name
The name of the actual parameter set can be set
here in 8 characters.
The name to be given should refer to the setting of
the equipment or the application, so that it can
easily be identified.
For example: mixer, lifter, grinder, etc…
xxxxxxxx Param 1
Saving the parameter set
For saving the parameter set of the frequency converter, first give name to the parameter set in menu ( 11-1-4 name) .
After that the parameter set can be saved in a memory of the equipment (menu item 11-1-2-1 ), or in a location of the
terminal (menu item 11-1-2-2 )
Loading up the parameter set
Parameter set can be loaded up from the memory (menu item 11-1-1-1 ), or from terminal ( 11-1-1-2 menu item).
Within the menu item, selection can be made upon the names of parameter sets saved ea
rlier. On pushing “Enter”,
upload of the earlier selected parameters starts.
i
Certain parameters will be loaded not in every case, or even never!