Procon V3D Series, Руководство программиста

Страница: 66 / 88

H - I - J
PROGRAMMER’S MANUAL
V8.94.11-
- 66 -
11. System parameters menu
In this menu, the factory set parameters and the individual system parameters relating to the frequency converter can
be inspected or set.
The items here:
•
operations connected with parameters,
•
macros,
•
remote control,
•
modulation,
•
slip compensation,
•
data relating the output,
•
language of the menu,
•
CAN bus,
•
terminal function,
•
automatic error acknowledgement,
•
event save,
•
introducing password,
•
menus with password.
•
read only parameters (serial number, software version number)
•
parameters that can be set by the manufacturer only (currents, voltages, special data, delete log)
Parameter sets
Submenu Explanation, further submenus Values Default setting Unit
11-1
parameters
memory: user parameter charts stored in the frequency converter
terminal: user parameter charts stored in the terminal
default:
factory set parameter chart
11-1-1 load parameters
Here factory parameters or settings saved earlier can be loaded, e.g. for setting another application.
When loading from terminal, even the whole parameter set or a part of it can be uploaded from
another equipment.
11-1-1-1 memory
The parameter sets stored in the equip-
ment can be uploaded here, according to
menu items
11-1-1-3 and 11-1-1-4 .
default
memory 1
memory 2
memory 3 memory 1
11-1-1-2 terminal
The parameter sets stored in the
programming terminal can be uploaded
here, according to menu items
11-1-1-3
and 11-1-1-4 .
terminal 1.
terminal 2.
terminal 3.
terminal 4. terminal 1.
11-1-1-3 menu item
Appointing the menu item for loading the
parameters belonging under the given
menu item. With appointing the menu
item, the parameters will not be uploaded
yet.
X-X-X-X 0-0-0-0
11-1-1-4 group
The parameter groups to be uploaded will
be given here.
menu: Only the parameters belonging
under the menu item given in menu
11-1-1-3 will be uploaded.
all: All parameters will be uploaded.
In the other cases, only the parameters
belonging to the given macros will be
uploaded from the memory or the
terminal. With appointing the parameters
to be uploaded the parameter set will not
be uploaded yet.
menu
all
minimum
ctrl.an.
ctrl.ENC
master/slave
user.1
user.2 all