Procom DGC-1010, Руководство по эксплуатации

Страница: 18 / 40

LED Annunciations Description: DGC101X has 2 annunciations on its front panel. These announce
the faults and warning of the system.
Nomenclature Symbol Description
Fault Fault This LED blinks in case of a fault
Warning Warning This LED blinks in case of a warning
11.0. Lamp Test:
If the DGC101X is switched on while the reset switch is pressed, all the LEDs start blinking till the
reset switch is kept pressed. This state shall persist till the switch is kept pressed and on release of
the switch DGC101X shall start functioning normally.
12.0. Setting Procedure:
DGC101X has provision to program the operating parameters. It is user/site configurable. User can
view all parameters, fault history, events, adjust clock, reset password and also edit the parameter.
`
Press Next Switch and Reset Switch simultaneously.
The LCD shall display “Main menu”
This menu has a various Edit/View mode which is scroll by and
Keys
Edit is password protected. The default password is 1 which is set by and Key.
12.1 Edit System Para/Edit Eng Para/Edit Prot Para/Edit Ann Para/Edit RS485 Para
Press Next Switch and Reset Switch simultaneously.
LCD shall display Edit System Para programming mode.
Scroll Up and Down to select the desired function by and Key.
Press
Next Switch to enter in the any of the above Edit mode.
It will ask for Password if this is the first entry.
Press
Start switch to set the password which is by default 1.
Press Next Switch , the LCD shall display all the first parameters of the selected.
Keys or Key can be used to modify the values of that Parameter.
Press for next parameter or for previous Parameter.
Press to update the setting or Press to quit and discard changes made.
12.2 Reset Service Alarm:
Scroll Up or Down to select the RST Ser Alarm .
Press Next Switch to enter in the RST Ser Alarm mode.
The LCD shall display: