Procom DGC-1010, Руководство по эксплуатации

Страница: 17 / 40

This icon shows the oil
temperature of
Fuel Sensor This icon shows the fuel of generator.
Charging Alternator
Voltage
This icon shows the voltage of alternator.
RTC This icon shows the current date and time.
10.0 Keys & LEDs Description
DGC101X has seven Keys provided on its front panel. The table below describes the operation of
these.
Keys Symbol Keys Function Description
Next It is used to scroll forward the parameters being
displayed on LCD.
Increment /Start It is used to increment the value of the parameters
being modified and it is used to issue the crank/
start command to engine. Crank is disabled while
in Programming Mode.
Decrement /Stop It is used to decrement the value of the
parameter being modified program and It is used
to issue the stop command to engine. Stop is
disabled while in Programming Mode.
Reset Reset key resets the Hooter and Fault signals. The
first press shall reset the hooter and next shall
reset the faults. A long press of 1 Sec shall reset
both.
Programming /History
Fault Mode Entry If both the keys are pressed simultaneously, the
unit will enter in first Level of the Programming
Mode. Here Edit/View of the Parameters or View
history, events and CAN status could be selected.
Back Scrolls the parameter back.
Forward Scrolls the parameter forward.