probrand ProTechT XMME-KIT00, Инструкция по установке и руководство пользователя

Страница: 2 / 32

IMPORTANT!
Self installation instructions and tips are provided for your convenience. It is your
responsibility to determine if you have the knowledge, skills, and physical ability
required to properly perform an installation. SiriusXM shall have no liability for damage
or injury resulting from the installation or use of any SiriusXM or third party products. It is
your responsibility to ensure that all products are installed in adherence with local laws
and regulations and in such a manner as to allow a vessel to be operated safely and
without distraction. SiriusXM product warranties do not cover the installation, removal
or reinstallation of any product.
The ProTechT™ Water-Resistant Marine Housing Kit’s water-resistant marine housing
docks and protects your XM ® Radio from damaging water, salt water, salt fog, UV rays,
and dust in normal marine environments.
The ProTechT Marine Kit housing is water-resistant, not waterproof. Because the
housing is water-resistant versus waterproof, there is some risk that in more extreme
marine conditions, water may penetrate the housing. If properly installed and sealed
closed, the ProTechT water-resistant marine housing will protect your XM Radio from
the marine environment, and during light cleaning of your boat.
The design of the radio and housing was intended for normal marine environments
and not intended to be submerged in or soaked with large amounts of water. Damage
caused to the XM Radio by excessive water from large waves, rain, or other marine
hazards are not covered by your XM Radio or SiriusXM 90 day warranty. If you
anticipate encountering such conditions, you should consider removing and storing
your XM Radio to avoid potential water damage. If water gets inside your marine kit
housing, remove your XM Radio immediately, then remove the housing from the mount
and power cable, and dry everything with a soft cloth. Allow all pieces of the unit to air
dry in order to dry out possible water behind the cradle of the housing. Once the marine
kit housing is completely dry, you may reinstall your XM Radio.