probrand ProTechT XMME-KIT00, Инструкция по установке и руководство пользователя

Страница: 21 / 32

21
Step Nine:
Connecting the power wire to the power source.
• If you use pliers or a metal tool to make the 12-volt connection, take caution not to
touch any other electrical connections or other adjacent metal with the tool.
• You are strongly encouraged to disconnect your battery when you are making these
electrical connections.
• Attach the power wire connector to your chosen power source (see Figure #15). This is
the wire with the fuse holder molded into it and the white stripe.
• Determine an appropriate grounding point for the other wire in the power wire
pair of wires. (The ground wire has no in-line fuse holder molded into it and no
white stripe.)
Figure #15
• If your chosen grounding point is not next to your chosen power source, you can
peel apart the positive and ground wires to the needed distance.
• If your grounding point will accommodate either of the crimp-on lugs, crimp the lug
to the ground wire at this time.
• Attach the ground wire to the grounding point.
Lugs
Part C
10-ft (3-m) power
wire with in-line fuse
Part B