probrand ProTechT XMME-KIT00, Инструкция по установке и руководство пользователя

Страница: 13 / 32

13
• To mount the XM marine antenna to metal, use marine-grade stainless steel machine
screws and mating lock washers and nuts, available from your local marina, marine
supply, or hardware store.
• Take care to not over-tighten self-tapping screws to prevent stripping the mounting holes.
• Route the antenna wire to the location of your ProTechT water-resistant marine hous-
ing or XM FM Direct Adapter based on the connection option that you chose in Step
One.
Method Two:
• Weave the pig-tail of the XM marine antenna through the center hole of the flange
mount adapter then attach the flange mount adapter to the XM marine antenna
using the four M4 x 0.7 x 10 Philips pan head stainless steel screws (with blue sealant).
• If you choose method two, use a ½-inch (1.27 mm), drill bit and drill a hole at the
cross hairs in the center of the antenna mounting template for the antenna cable.
• Locate the black, round, flat foam gasket affixed to the paper backing. Gently peel
the gasket from the backing. Place the sticky side toward the flange and affix the
gasket to the mating channel in the flange. Press the gasket firmly into place.
• Remove template #2 from the antenna mounting location.
• Route the XM marine antenna cable through a center hole (shown on mounting
template #2), and then to the XM FM Direct Adapter location or the ProTechT water-
resistant marine housing location, depending on your installation (see “Step One”).
• Securely tighten the 25’ (7.62 m) antenna cable to the pigtail leading out of the XM
marine antenna.
• If the surface that you choose for your XM marine antenna is wood or fiberglass, use
the four supplied #8-18 x ¾ stainless steel, self-tapping screws for firmly mounting the
antenna to the chosen surface.
• To mount the XM marine antenna to metal, use marine-grade stainless steel machine
screws and mating lock washers and nuts, available from your local marina, marine
supply, or hardware store.