manualshive.com logo in svg

pro.point 8619470, Руководство по эксплуатации, Страница: 2 / 50

Поделиться
Скачать
pro.point 8619470 Скачать руководство пользователя страница 2

2

Thank you for your purchase of your Pro.Point Welding Machine.

We are proud of our range of welding equipment that has a proven track record of innovation, performance 

and reliability. Our product range represents the latest developments in Inverter technology put together 

by our professional team of highly skilled engineers. The expertise gained from our long involvement with 

inverter technology has proven to be invaluable towards the evolution and future development of our equip-

ment range. This experience gives us the inside knowledge on what the arc characteristics, performance 

and interface between man and machine should be. Within our team are specialist welders that have a 

proven history of welding knowledge and expertise, giving vital input towards ensuring that our machines 

deliver control and performance to the utmost professional level. We employ an expert team of profes-

sional sales, marketing and technical personnel that provide us with market trends, market feedback and 

customer comments and requirements. Secondly they provide a customer support service that is second 

to none, thus ensuring our customers have confidence that they will be well satisfied both now and in the 

future. 

Pro.Point welders are manufactured and compliant with - CAN/CSA E60974-1 &

ANSI/IEC 60974-1, guaranteeing you electrical safety and performance.

WARRANTY

As part of Royal Service, a customer may return a defective unit to any Princess Auto location for a new replacement 

unit within 3 years of the purchase date. 

Содержание 8619470



















































Отзывы:

Нет отзывов