![background image](http://html1.mh-extra.com/html/pro-point/8619470/8619470_operating-manual_1607430010.webp)
10
(1) Connect the
electrode lead
to
(2) Set MIG/TIG/ARC selector
switch to MMA
(1) Connect the earth
lead to
1) Connection of Output Cables
Two sockets are available on this welding machine. For ARC welding the electrode holder is shown
be connected to the negative socket, while the earth lead (work piece) is connected to the positive
socket, this is known as DC- polarity. However various electrodes require a different polarity for
optimum results and careful attention should be paid to the polarity, refer to the electrode
manufacturers information for the correct polarity.
DC+ Electrode connected to output socket.
DC- Electrode connected to output socket.
(2) Turn the power source on and select the ARC function with the MIG/TIG/ARC selector switch.
(3) Set the welding current relevant to the electrode type and size being used as recommended by the
electrode manufacturer.
(3) Set the welding current using the amperage
control dial. and adjust arcforce if required
(6) Hold the electrode slightly above the work
maintaining the arc while travelling at an even
speed.
(4) Place the electrode into the electrode holder
and clamp tight.
(7) To finish the weld, break the arc by quickly
snapping the electrode away from the work
piece.
(5) Strike the electrode against the workpiece to
create an arc and hold the electrode steady to
maintain the arc.
(8) Wait for the weld to cool and carefully chip
away the slag to reveal the weld metal below.
Installation & Operation for ARC (Stick)
Welding for Pro.Point 145 & 180
Содержание 8619470
Страница 48: ...48 NOTES ...
Страница 49: ...49 NOTES ...
Страница 50: ...50 PRINCESS AUTO LTD Phone 1 800 665 8685 WWW PRINCESSAUTO COM MADE IN CHINA ...