![background image](http://html1.mh-extra.com/html/pro-point/8619470/8619470_operating-manual_1607430017.webp)
17
t
(3) Connect weld power lead to
(7) Place wire onto spool holder - (spool
retaining nut is left hand thread ) Feed
the wire through the inlet guide tube on
to the drive roller.
(6) Fit the correct sized Knurled Drive
roller for Gas Less Flux Cored wire
(2) Connect earth lead
to
(4) Set MIG/TIG/MMA selector
switch to MIG
IMPORTANT :
When connecting the torch
be sure to tighten the connection.
(1) Connect MIG torch
(1)
Connect Mig Torch
IMPORTANT: When connecting the torch be sure to tighten the connection. Additionally Digital MIG
torch must be connected prior to power being turned on otherwise remote control will not work
(2) Connect the earth lead to Positive socket
(3) Connect the weld power lead to Negative socket
(4) Turn the power source on and select the MIG function with the MIG/TIG/MMA selector switch.
(5) Set torch operation 2T / 4T.
• When 2T operation is selected press trigger Arc starts, release trigger, Arc stops.
burnback operation is automatic and preset.
• When 4T operation is selected press and release trigger Arc starts, press and release trigger Arc stops.
burnback operation is automatic and preset..
(6) Fit the correct size Knurled drive roller for Gas Less Flux Core wire.
(5) Select torch operation 2T or 4T
WARNING:
Disconnect the Electrode Holder cable from the machine before using MIG function. If cable is not disconnected welding
voltage is present and can cause arcing or flash.
WARNING:
Ensure that an approved welding helmet, protective clothing and gloves are use for all welding operations
t
Installation & Operation for Gasless MIG for
Pro.Point 145 & 180
Содержание 8619470
Страница 48: ...48 NOTES ...
Страница 49: ...49 NOTES ...
Страница 50: ...50 PRINCESS AUTO LTD Phone 1 800 665 8685 WWW PRINCESSAUTO COM MADE IN CHINA ...