![background image](http://html1.mh-extra.com/html/pro-point/8619470/8619470_operating-manual_1607430030.webp)
30
WARNING:
Disconnect the Electrode Holder cable from the machine before using MIG function. If cable is not disconnected welding
voltage is present and can cause arcing or flash.
(1) Connect TIG torch to Euro connection socket,
IMPORTANT : When connecting the torch be sure to tighten the connection.
(2) Connect earth lead to Positive
(3) Connect weld power lead to Negative
(4) Turn the power source on and select the TIG function with the MIG/TIG/MMA selector switch.
(5) Set torch operation 2T / 4T.
• When 2T operation is selected press trigger Gas starts, touch and lift arc start,
release trigger Gas and Arc stops.
• When 2T operation is selected with downslope time of either 1 to 10 seconds press trigger Gas starts,
touch and lift arc star, release trigger, after 1 to 10 seconds depending on the downslope time selected
Gas and Arc stops. Crater fill operation is automatic to factory preset level.
• When 4T operation is selected press and release trigger Gas starts, touch and lift arc start,
press and release trigger Gas and Arc stops.
• When 4T operation is selected with downslope time of either 1 to 10 seconds press and release
trigger Gas starts, touch and lift arc start Press and hold trigger, after 1 to 10 seconds depending on
the downslope time selected Arc crater fill downslopes, crater fill operation is automatic to factory
preset level., release trigger Gas and Arc stops
NOTE: This feature is recommend for welding above 70Amps only.
(6) Connect the gas line to regulator and connect the regulator to the gas cylinder.
(6) Connect the gas line to the regulator
and connect to the gas cylinder
(5) Set Torch operation 2T/4T
(1) Connect TIG torch to Euro Connection
(4) Set TIG/MMA/MIG/Spool Gun
selector switch to TIG
IMPORTANT :
When connecting the torch
be sure to tighten the connection.
(3) Connect weld power lead to
WARNING:
Ensure that an approved welding helmet, protective clothing and gloves are use for all welding operations
(2) Connect earth lead to
tt
Installation and Set Up for DC TIG Welding for
Pro.Point 145 & 180
TIG Torch Sold Seperatley
Содержание 8619470
Страница 48: ...48 NOTES ...
Страница 49: ...49 NOTES ...
Страница 50: ...50 PRINCESS AUTO LTD Phone 1 800 665 8685 WWW PRINCESSAUTO COM MADE IN CHINA ...