Lume n 200/S/P r o
™
35
5.2
Installing your system.
5.2.1 Installing the Bulb
Required equipment:
Lumen200Pro, Hex Key, Prior LM
200B1-A
Bulb
Warning:
•
Only use Prior LM
200B1-A
bulbs, failure to do so may cause damage to the unit.
•
Do not
touch the inside of the reflector of the bulb.
•
The bulb is delicate, handle with care.
Instructions:
8.
Disconnect the Lumen200Pro from the mains supply,
(If the lumen has been previously
switched on, wait for 30 mins to allow bulb to cool)
.
9.
Find a flat surface and place the lumen upside down on the surface.
10.
Unscrew the four Hex screws and remove the panel, as indicated in Figure 26 below.
Figure - 26 Bulb housing
.
Hex Screws
