14
P rior Sc ie ntific
Figure 4.1d: Lumen Bulb.
7.
Lift the spring towards the bulb, as you do so the bulb will be pushed into the correct
position, click the springs all the way into the Lamp Spring Restraints. (see Fig 6).
Fig 6: Lamp Spring Restraint.
8.
The bulb is now firmly held vertically in place.
9.
Plug Data connector into its socket on the PCB.
10.
Replace the bulb housing cover and replace the four hex screws.
Data Connector
Power Connector
Lamp Spring
Lamp Spring
Restraint
Bottom of the Bulb
Fig 5 - The LM
200B1-A
Bulb
