Lume n 200/S/P r o
™
37
Figure 4.1d: Lumen Bulb.
14.
Lift the spring towards the bulb, as you do so the bulb will be pushed into the correct position,
click the springs all the way into the Lamp Spring Restraints. (See Figure 29).
15.
The bulb is now firmly held vertically in place.
16.
Plug Data connector into its socket on the PCB.
17.
Replace the bulb housing cover and replace the four hex screws.
Data Connector
Bottom of bulb
Lamp Spring
Lamp Spring
Restraint
Power Connector
Fig 28 – The LM
200B1-A
Bulb
Fig 29 – The Lamp Spring Restraint
