Printek PrintMaster 860, Руководство оператора

Страница: 59 / 75

CONTROL CODE AND
ESCAPE SEQUENCE SUMMARIES
Genicom 3840 and 3410 Emulation
BEL Bell
BS Backspace
CR Carriage
Return
CSI Control Sequence Introducer
ESC D Line Feed
ESC E New Line
ESC ESC n Select Software Interface n
ESC H Set Horizontal Tab
ESC J Set Vertical Tab
ESC K Subscript Printing
ESC L Superscript Printing
ESC P <graphics> ESC \ 6 Pin Graphics Mode
ESC [(p1);(p2)<SP>B Oversize Font / Graphic Size Modification
ESC [(p1);(p2)<SP>G Line / Character Spacing
ESC [(p)` Horizontal Position Absolute
ESC [(p)a Horizontal Position Relative
ESC [(p)d Vertical Position Absolute
ESC [(p)e Vertical Position Relative
ESC [(p1);(p2)f Vertical and Horizontal Position Absolute
ESC [(Ps)g Clear Tabs
ESC [(p)h Set Auto CR on LF
ESC [(p)j Horizontal Position Backwards
ESC [(p)k Vertical Position Backwards
ESC [(p)l Reset Auto CR on LF
ESC [(p1);...(pn)m Font and Print Modes
ESC [(p1)p Paper Path
ESC [(p1)q Graphics Density
ESC [(p1);(p2);(p3)r Forms Setup
ESC [(p1);(p2)s Margins Setup
ESC [(p1)t Oversized Font / Barcode Mode
ESC [(p1);(p2);...(p22)u Set Horizontal Tabs at Certain Positions
ESC [(p1);(p2);...(p12)v Set Vertical Tabs at Certain Positions
ESC [(p1);(p2)<SP>{ Paper Shear
ESC [(p1);(p2);...(p12)} Set Barcode Parameter
ESC ]6;4;(p3);(p4)ESC\ Straps and Options
ESC c Reset
ETX End of Text
FF Form Feed
HT Horizontal Tab
HTS Set Horizontal Tab Stop
IND Index
LF Line
Feed
NEL Next Line
PLD Partial Line Down (Subscript)
PLU Partial Line Up (Superscript)
VT Vertical Tab
VTS Set Vertical Tab Stop
53