Printek PrintMaster 860, Руководство оператора

Страница: 57 / 75

PRINTER RESET CONDITIONS
The following list describes conditions that are assumed whenever power is applied to the printer, changes
have been made in
MENU
, or a reset escape sequence is received (when the printer is operating in an
emulation mode that supports such a sequence).
This list includes all variables that you can modify for all emulations, even though some emulations cannot
modify all of the variables shown. Refer to the appropriate section of this manual for the emulation you
are using.
Variable Reset Condition
character pitch according to current form setup
left margin according to current form setup
right margin according to current form setup
line pitch according to current form setup
form length according to current form setup
top margin according to current form setup
bottom margin according to current form setup
font according to current form setup
impact mode according to current form setup
language according to current form setup
normal/slashed zero according to current form setup
auto cut mode according to current form setup
unidirectional mode according to current form setup
top of form set to current position
text in an incomplete line discarded
input buffer cleared (unless reset from host)
control of data bit 8 accepted as received
control character symbols according to interface setup
italics off
double high
off
double strike off
double wide off
emphasized off
superscript/subscript off
underline off
horizontal tabs
to every eight columns
vertical tabs cleared
51