Printek PrintMaster 860, Руководство оператора

Страница: 49 / 75

U S I N G R E M O T E S E T U P
43
XON/XOFF=Off,On
ETX/ACK=Off,On
[ParallelInterface]
Emulation=ANSI_X3.64,Epson,IBM_Proprinter,
DEC_LA120,TTY,Printek
AutoCR=Off,On
AutoLF=Off,On
HostFFatTOF=No,Yes
Characters=Control,Printable
MinimumBuffer=No,Yes
[Options]
MaxFormAllowed=0 ... 9
AutoScroll=Off,1 ... 15
PaperOutFault=BreakPage,ReprintPage,FinishPage
PageSize=0K ... 28K
TopOfOff,On
TopOfOversized=Off,On
IngnoreCharacter=Off,On
CharToIgnore=0 ... 255
TruncateLines=No,Yes
BottomSlew = Fast, Normal (862 only)
[Security]
AlignPrint=ViewOnly,EditAllowed
FormsMenu=ViewOnly,EditAllowed
InterfaceMenu=ViewOnly,EditAllowed
OptionsMenu=ViewOnly,EditAllowed
[EndPrintekSetup]
Remote Setup Example File
The following example will set up three forms. Before the forms are set up, “AlignPrint” and all “Forms”
will be reset to their factory default values so that only the “non-default” values have to be set.
The first form will begin printing one line from the top-of-form, be named “CHECKS”, have a form length
of 42 lines (7 inches at 6 LPI), and use the Epson FX Draft font.
The second form will begin printing two characters (at 10 CPI) from the left edge and two lines (at 6 LPI)
from the top edge of the form. The name will be “INVOICES” and will print using the Epson FX Draft
font.
The third form will begin printing at the left margin (at 12 CPI), two lines (at 8 LPI) from the top edge of
the form. The name will be “REPORTS”, and printing will be at 8 LPI with a form length of 8½ inches.
;
Example setup file for three forms.
[BeginPrintekSetup]
AlignPrint=FactoryDefaults
Forms=FactoryDefaults
[Form0]
MovePrintDown=0.17
FormName="CHECKS"
FormLength=42
Font=Epson_FX_DF