Prince Castle DCFT-MCD Series, Руководство по обслуживанию

Страница: 14 / 66

Printed in USA 12/20 © 2020 14
527-504rev
M
_EN
Vertical Toaster
DCFT-MCD Series
Remove/Replace Heel Compression Adjust Assy
Unplug the unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
WARNING
Open and remove front door. Set door aside.
2
Remove screw and
nut that secure front
lower gear cover to
immediate support.
Set cover, nut, and
screw aside.
3 Nut
Cover
Screw
4
Remove retaining ring from shaft. Set ring aside.
Gear Belt
Gear
Retaining
Ring
5
Remove belt from pulley and let hang in place.
6
Slide gear off shaft and set aside.
7
Remove second
retaining ring
from drive shaft.
Set ring aside.
Retaining
Ring
Remove compression knobs from right side panel.
8
Remove screws (7) that secure right side panel to
frame. Set screws aside.
9
Disconnect electrical connectors (2) from panel. Set
panel aside.
10
Remove nuts (4) that secure drive train cover and drive
train to frame. Disconnect electrical connectors from
drive train/motor. Set nuts, cover, and drive train/motor
aside.
11
Remove screws (3 on left, 3 on right) that secure heel
compression assembly to frame. Set screws aside.
12
Screws
(3 on each
side)
Drive Shaft