Prince Castle DCFT-MCD Series, Руководство по обслуживанию

Страница: 19 / 66

527-504rev
M
_EN
19 Printed in USA 12/20 © 2020
Vertical Toaster
DCFT-MCD Series
Remove/Replace Crown Compression Adjust Assy (cont.)
Remove screws (5) that secure Electronics Tray to
frame. Set screws aside. Slide tray out so that it is fully
extended.
1
2
Disconnect heater wires connected to Back Heater
1
3
Switch.
Back Heater
Switch Nuts
Heater
Wires
Remove screws (3 on left, 3 on right) that secure
crown compression assembly to frame. Set screws
aside.
1
5
Screws
(3 on each
side)
Drive
Shaft
On both left and right side of conveyor belt, secure
vice grip to bracket and top nut to hold assembly in
position.
1
6
1
7
Slide assembly drive shaft out of bearing.
Pry assembly on left and right sides to release
18
assembly out of frame.
Release both vice grips, press downward on top edge
of assembly and pull assembly out of frame. Set
assembly aside
.
19
1
4 Follow heater wires back through tray and cut any
cable ties that hold the wires to the tray.