Video Setup
Setup -
6
Resolution
Select the resolution between 1080p, 720p, D1, CIF, QCIF.
Available resolution can be depends on the codec setup between
the channels.
Below are the restriction when setup the resolution as the 1080p.
- Only CH No. 1 can be setup.
- CH No.4 /5 can't be setup.
- In case you assign 1080p 15 frame to No.1 channel for video
setup, if you want to keep the good quality of image, you
should use only up to channel No.2.
- CH No. 1, 1080p is selectable among 1, 5, 10, 15 fps and others
should not have higher frame than set at 1080p.
Ex) If CH No. 1 set up of 1080p as 10 fps, CH No. 2 and NO. 3 is
only selectable among 1, 5, 10 fps.
<Resolution of Video Format>
<Support Resolution of Codec>
Codec
Choose the video compression method preferred between
H.264, MJPEG. According to the selected codec, the
subcategories can be changed automatically.
Description
Input the additional description about the selected channel.
Max. 15 alphabets are allowed(Including space). For the
description, English Alphabets, numbers and special
characters ( / ~ ` ! @ $ ^ ( ) _ - { } [ ] ; , ) can be used.
3
2
4
Live Video Channel Setup
Setup the multiple codec and Video according to the
environment of installed camera. Using selected channel
on the ‘Web-Viewer > PTZ Control > Video Format’.
CH No.1 and No.2 are the default CH, so they can't be
changed. However, detailed category of default codec can
be setup. CH No.3,4,5 are the user channel, and codec and
detailed category of codec can be setup.
If CH No.1, 2 and some of channel are setup to High Performance
(High Resolution and Frame Rate), remainder of channels can not
be setup. Also, when the CH No.4,5 are already setup, there can
be some restriction of setting up the resolution and fps when you
try to setup the detailed category of remained channel.
1080p
720p
D1
CIF
QCIF
PAL
1920 x 1080
1280 x 720
720 x 576
352 x 288
176 x 220
1
NTSC
1920 x 1080
1280 x 720
720 x 480
352 x 240
176 x 144
H.264
MJPEG
1080p, 720p, D1, CIF
720p, D1, CIF, QCIF
1
2
3
4
8
7
6
5
10
9
