Schedule Setup
Setup -
6
1
2
3
4
Enable / Disable
Set Schedule function to be enabled or disabled. Schedule
function enables to transfer series of still images in a time
interval specified.
Transfer Interval
Define time interval of image transfer from 5 / 15 / 30 / 45
/ 60 sec. and 5 / 15 / 30 / 45 / 60 min.
Schedule function enables to transfer series of still images in
a time interval specified via E-mail or FTP. (For more detail,
see ‘Transfer Setup’ in this chapter)
1
2
Activation Time
Select activation time from Always / Only Scheduled Time.
3
Always
Only
Scheduled Time
Transfer image at all times.
Transfer image during the scheduled time.
To setup ‘Only Scheduled Time’, you need to define Start time and
End time followed by selecting Days. The setup schedule is
repeated every week.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to 9:00am
Wed.
4
Click ‘Apply’ to make above setting effective.
