Installation
Installation -
2
4
You have to detach the PTZ mechanism from the upper
housing to plug the connector of cable. When detach PTZ
mechanism, pressing down and holding up the black
handles in both sides of PTZ mechanism.
You should remove the tape used to fix the PTZ
mechanism after detaching the PTZ mechanism from
the upper housing.
5
[1] Wind the water proof tape on the pipe of upper housing.
[2] Hooking the safety wire on the hole of pipe.
[3] Attach the upper housing to wall mount bracket by
turning it at least seven turns.
To fix the upper body orientation, turn the handle of
double nuts to clockwise tightly.
[2]
[1]
[3]
