Price FFU series, Инструкция по установке и обслуживанию

Страница: 3 / 42

FAN FILTER UNIT
PRODUCT OVERVIEW
priceindustries.com | FAN FILTER UNIT - Manual
Read and Save These Instructions
Warning! To reduce the risk of fire, electrical shock, or injury to persons, observe the following:
A. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and
standards, including fire-rated construction.
B. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
C. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer:
In the United States
2975 Shawnee Ridge Court
Suwanee, Georgia USA 30024
Ph: 770.623.8050
Fax: 770.623.6404
In Canada / International Export Sales Office
638 Raleigh Street
Winnipeg, Manitoba Canada R2K 3Z9
Ph: 204.669.4220
Fax: 204.663.2715
D. Disconnect the unit from the electrical power source before attempting any service. Electrical service should be performed by
a licensed electrician or authorized service technician.
E. When performing any type of maintenance on the FFU, be careful to reduce as much as possible the potential for introducing
the internals of the unit to dirt, dust, and debris that may be present in the unit's external environment.
F. To reduce the risk of injury to persons, install the unit at least 7ft above grade or in ceiling.
Before You Start
Shipping Information
Inspect all cartons and boxes for flaws and shipping damages. If anything is discovered to be damaged, contact the shipping
company and file a freight claim.
Filter Information
Ensure that all HEPA/ULPA filters are stored in a clean, dry location in a vertical position, as labeled on the carton. Do not open the
HEPA/ULPA filters until they are ready to be installed in the FFU units. All construction in the space should be complete, the site
and upstream air should be clean so as not to unnecessarily load the filter.
Ensure ductwork is balanced to scheduled flow and that both the space and ductwork is clean, free of debris, and ready for
operation prior to installation of filter. To ensure fan filter units are properly balanced, read
Technical Note: Design with VAV/
Constant Flow Boxes and Ducted Applications prior to starting installation.
A minimum of two (2) people will be required to install the filters.
NOTE: Extreme caution should be taken to avoid contact with filter media. Touching filter media may result in filter failure. Damageto
filters can occur during installation or during leak qualification testing. The filters supplied by Price have been 100% tested and
certified by the manufacturer to be free of defects and leaks. Price cannot accept responsibility for damage that occurs after
shipment, whether through transit, handling or installation, and will not replace filters under Price standard warranty.
1
priceindustries.com | FAN FILTER UNIT - Manual