PREVOST X3-45 2011, Руководство оператора

Страница: 62 / 214

Controls and Instruments 56
Panel
22136
Air is sent to panel registers. The
footwell damper is closed.
Temperature Degree Selector
22133
Toggles the HVAV control unit
temperature units between Fahrenheit
and Celsius. The driver’s section must
be on. Also toggles the outside
temperature units displayed on the
telltale panel.
AUDIO-VIDEO SELECTOR FOR THE
PASSENGER’S AREA
The VSS-05 Video and Sound Selector enables
the driver to select audio, audio/video and video
source with settings of volume level, bass,
treble, etc. for the passenger’s area only. The
DVD player, TV tuner, P.A. system and auxiliary
audio or video sources are controlled with this
unit.
TURNING POWER ON AND OFF
Press button to turn on the unit.
Press button again to turn off the unit.
SETTING OF VOLUME/ BASS/ TREBLE/
BALANCE/ LOUDNESS
Press AUDIO button repeatedly to
choose the desired mode. Each
press changes the modes as
follows:
Turn volume knob until the desired sound is
obtained in each mode. The final setting will
apply to all audio sources for the passenger’s
area. If no button is pressed within 8 seconds
after selecting BASS, TREB, BAL and LOUD
modes, the unit automatically sets in the VOL
mode. The volume value adjust from 0 (com-
plete mute) to 40 (maximum).
SELECTION OF AUDIO OR AUDIO/VIDEO
SOURCE
Press RADIO/CD button to select
the dashboard radio as current
audio source for the passenger’s
area. Pressing this button will also
permit to listen to the CD inserted in
the dashboard radio.
Press AUX AUDIO button to select
an auxiliary audio input as current
audio source.
Press DVD button to select DVD
player as current audio/video
source.
If an optional TV tuner is installed,
press TV button to select it as
current audio/video source.
Press AUX VIDEO button to select
an auxiliary video input as current
audio/video source.
NOTE
If CAM or NAV is already activated, DVD, TV
or AUX VIDEO cannot be selected and
displayed.
OPERATION OF THE PANORAMIC VIEW
CAMERA
1. Press CAM button to select the
optional panoramic view camera
signal. The video section of the
VSS-05 LCD panel will show
“CAM”. The video monitors turn
on automatically.
2. Press CAM button again to turn
off the panoramic view camera
and return to previous
audio/video source.
DISPLAY OF THE GPS NAVIGATION
GUIDANCE SCREEN
Not applicable
NOTE
When CAM or NAV is selected, the previously
selected audio source remains active.