PREVOST X3-45 2011, Руководство оператора

Страница: 111 / 214

Other Features 105
f. You must press and hold brake pedal for
60 seconds, as instructed.
g. Once the brake pressure test is
completed the pressure leak test results
are displayed.
DATA LOG
1. Vehicle ID
2. Total Data
Total Data menu indicates the accumulated
engine values that have been logged during the
lifetime of the engine ECU.
Available information:

Total distance traveled

Total fuel used

Total engine hours

Total idle time

Total PTO hours

total engine revolutions
3. Trip Data
This menu displays the trip information listed
below. This function must be reset before each
measurement (before each new trip or leg)
using the Reset Trip Data menu.
Available information for the trip or leg is:

Trip distance (miles or km)

Trip fuel average (mpg, liter/100km; km/liter)

Trip fuel used (gallons or liters)

Trip duration on cruise control (hours)

Trip duration with engine rpm greater than
economy rpm (hours)

Trip duration while engine rpm is greater than
the desire maximum rpm RPM Limit set in
Fleet Limits sub-menu (hours)

Trip fuel used with engine rpm greater than
the economy rpm (gallons/liters)

Trip average speed (mph, km/h)

Trip duration with speed greater than the
maximum desired speed as set in Fleet
Limits sub-menu (hours)

Trip engine hours

Trip duration on engine idle (hours)

Trip fuel used while in engine idle (gallons,
liters)
4. Reset Trip Data
This menu can only be accessed if the correct
password has been entered.
Use this function to reset measurements of the
Trip Data menu before each new trip or leg.