PREVOST X3-45 2011, Руководство оператора

Страница: 121 / 214

Other Features 115
WHEELCHAIR LIFT AND ACCESS DOORS
18615
WHEELCHAIR ACCESS DOOR OPERATING HANDLE
18616
OPERATING THE WHEELCHAIR LIFT
WARNING
Inspect the lift before each use as described
in the RICON Owner’s manual. If any unsafe
condition exists, or if unusual noises or
movements are noticed, DO NOT use and
contact an authorized RICON dealer for
repair.
WARNING
Read and comply with all warning labels and
symbols affixed to the wheelchair lift.
WARNING
Do not operate with a load in excess of 660
lbs (300 Kg).
The coach must be parked at least 10 feet (3
meters) away from other vehicles or large
objects. Turn on the POWER ENABLE switch
and then control each lift motion by pressing an
appropriate button. The POWER ENABLE
switch provides power to the pendant and
thereby enables the lift. When turned on, the
power switch and each button illuminate. When
operating the lift, be careful the control wire
doesn’t bind with the lift mechanism.
Using the handheld control pendant, deploy the
lift by pressing on the DEPLOY button.
When the lift begins to deploy, it is normal to
hear a clutch action of one or two clicks should
be heard. Once deployed, lift the handrails until
locked in vertical position. Buckle the restraint
belt.
Use the UP and DOWN buttons to raise or lower
the platform. Upon reaching the top or the
bottom of its stroke, the appropriate rollstop will
lower.
NOTE
The restraint belt acts as a safety device and
it prevents raising or lowering the lift when not
buckled.
Roll the wheelchair onto the platform with the
wheelchair facing outwards because the front
rollstop is not designed to keep the large rear
wheels of a wheelchair from rolling off the
platform.
CONTROL PENDANT
23364
WARNING
Use extreme care when rolling on or off the
platform and lock the wheelchair brakes while
stationary on the platform. Make sure the
wheelchair fits safely on the platform. Keep
arms and legs away from moving parts.