PRESONUS StudioLive CS18AI, Руководство пользователя

Страница: 42 / 88

3 Controlling StudioLive RM-series Mixers
3.2 Basic Channel Operation
StudioLive
™
CS18AI
Owner’s Manual
38
Freq. Enabling this sets the four EQ encoders and meters to
control the center frequency of the associated EQ band. You can
adjust the center frequency for each band as follows:
•
Low Band: 36 to 465 Hz
• Low-Mid Band: 90 Hz to 1.2 kHz
• High-Mid Band: 380 Hz to 5 kHz
• High Band: 1.4 kHz to 18 kHz
Q. Enabling this sets the four EQ encoders and meters to control the Q of the
associated EQ band. The Q is the ratio of the center frequency to the bandwidth.
In the top left and right corners of the EQ graph are buttons
to engage the High or Low band’s Shelf mode.
Low Shelf. Enabling the Shelf button turns the Low band into
a low shelving EQ that alters, by a fixed amount, a band of low
frequencies at and below a user-selected frequency. When the
Shelf button is not engaged, the Low band is parametric.
Power User Tip:
A low shelving EQ is like a bass control knob on a stereo. In
this mode, the Center Frequency control selects the shelving frequency.
High Shelf. Enabling the Shelf button turns the High band into
a high shelving EQ that alters, by a fixed amount, a band of high
frequencies at and above a user-selected frequency. When the
Shelf button is not engaged, the High band is parametric.
Power User Tip: A high shelving EQ is like a treble control knob on a stereo. In
this mode, the Center Frequency control selects the shelving frequency.
Band On/Off buttons are located on the right of the screen.
These toggle the individual EQ bands on and off.
3.2.6 Panning and Stereo Linking
Panning for each input and output bus is set from the Pan (Selected Value) in the
Master Control section.
The Scribble Strip display for the selected channel shows the Pan
setting. When two channels are linked as a stereo pair, the Pan
graphic display will automatically change to a stereo pan.
Stereo linking is done within the Fat Channel. Input channels, aux buses, and
subgroups can be linked to create a stereo pair. The stereo pairs are predefined and
cannot be changed.