60
6
Digital Effects | Master Control
6.5
Using MIDI Control Mode to Remote-Control StudioLive
StudioLive™ 16.0.2 USB
Owner’s Manual
12. Use the Value Up button to set the Program Change number to 002.
13. Press the Exit button twice and continue to FXA Preset Recall.
FXA Preset Recall
Next we will set CTL Pedal 1 to recall a preset on FXA. Press the right
Parameter button until the LCD displays “CTL1: On MIDI.”
1. Press the Write button so that the LCD displays “Edit MIDI.”
2. Press the Write button again. You will see “001: ----- -----.“
3. Press the right Parameter button.
4. Press the Value Up button so that the LCD displays “001:PC CH#01 PC#001.”
5. The first field defaults to Program Change (“PC”). This is how the
StudioLive recalls FX presets, so you can leave this field as it is.
6. Use the right Parameter button to move to the next field: MIDI channel number.
7. Set the MIDI channel to 2.
8. Use the right Parameter button to move to the next field: Program Change
number. The number you enter will determine which FX Preset will be recalled.
9. Use the Value Up button to set the Program Change number to 10.
10. Press the Exit button twice and continue to FXA Assign/Unassign to Mains.
FXA Assign/Unassign to Mains
Next, we will set CTL Pedal 2 to control the Main assignment (“mute”) for FXA.
1. Press the right Parameter button until the LCD reads “CTL2: Assign.”
2. The curser should be on the CH# Tx field. Press the Value
Down button until the MIDI channel value is “04.”
3. Use the right Parameter button to navigate to the CC# field.
4. Use the Value Up and Down buttons to set the Control Change number to 64.
5. Continue to FXA and Main Bus Output Levels.
FXA and Main Bus Output Levels
1. Press the right Parameter button until the LCD reads “EXP1: Assign.”
2. Use the right Parameter button to navigate to the CH# Tx field and
press the Value Down button until the MIDI channel value is “04.”
3. Use the right Parameter button to navigate to the CC# field.
4. Use the Value Up and Down buttons to set the Control Change number to 40.
5. Press the right Parameter button until the LCD reads “EXP2: Assign.”
6. Use the right Parameter button to navigate to the CH# Tx field and
press the Value Down button until the MIDI channels value is “04.”
7. Use the right Parameter button to navigate to the CC# field.
8. Use the Value Up and Down buttons to set the Control Change number to 42.
Continue to Naming and Saving Your Patch.
