60
5
Digital Effects | Master Control
5.2
The Digital FX (Effects) Menu
StudioLive™ 32.4.2AI
Owner’s Manual
5.2
The Digital FX (Effects) Menu
The StudioLive AI mixers feature four internal effects processors. The processors
for FX A and FX B are dedicated to reverb and access the StudioLive’s reverb
library. The processors for FX C and FX D are dedicated to delay effects and
access the StudioLive’s library of delay presets. These effects buses can be
routed to any of the subgroups, the aux buses, or the main outputs.
To access the effects library and make adjustments to effects parameters, press the
FX button in the Master Control section.
The first page of the FX menu is the QuickView screen. It
displays the effects presets loaded on each of the internal
effects buses and the main parameter for each. Effect A is
assigned to FX A bus, Effect B is assigned to FX B bus, Effect C
is assigned to FX C, and Effect D is assigned to FX D.
Use the Next and Prev buttons to navigate through the
screen. To change a preset, use the Value encoder to scroll
through the library.
When you have arrived at your selection, press the Recall button to load it.
Press the Page Down button to move to the next pages of the FX menu. Pages 2-5 of
the FX menu display the Parameter Detail pages for FX A, FX B, FX C, and FX D,
respectively. The Parameter Detail page displays all the parameters for the presets
loaded onto the corresponding effects bus. These parameters will change depending
on the type of effect you have chosen. Again, use the Next and Prev buttons to
navigate through the screen and use the Value encoder to change the selected
parameter.
Power User Tip:
You can jump to an FX bus’s Parameter Detail page by
simply pressing its Select button; for example, if you press FXC’s Select
button, the FX page will open to FX C’s Parameter Detail page.